#daemon configuration telnet_port 4444 gdb_port 3333 #interface interface ft2232 # You have to comment out ft2232_device_desc in Windows environment ft2232_device_desc "ARM JTAG A" ft2232_layout "jtagkey" ft2232_vid_pid 0x0403 0x6010 jtag_speed 40 #use combined on interfaces or targets that can't set TRST/SRST separately #reset_config trst_and_srst srst_pulls_trst reset_config trst_and_srst #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe jtag_nsrst_delay 10000 jtag_ntrst_delay 10000 #target #target arm7tdmi target arm7tdmi little reset_run 0 arm7tdmi-s_r4 run_and_halt_time 0 30 #target configuration daemon_startup reset working_area 0x0 0x40000000 0x40000 nobackup #flash configuration flash bank lpc2000 0x0 0x7D000 0 0 lpc2000_v2 0 14765 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger